Drying Fans & Accessories

Drying Fans & Accessories

Phoenix Focus Axial Air Mover

Phoenix Focus Axial Air MoverThe Focus™ corner revolutionised evaporative drying by producing effective air velocities over a larger area than competitive products. This highly focused air flow is directed towards the most difficult areas to dry namely, carpet and cushion, sub-floor, sill plate and walls. No other fan dries the sill plate as fast! Finally, the Phoenix 50Hz Axial Air Mover with FOCUS™ Technology sustains these air velocities further than any other 50Hz Axial Air Mover.

Conventional axial air movers create a circular air jet and the only way to get air into the square corner is to point the fan in the direction of the corner. This angle wastes valuable air velocity and effective distance. FOCUS™ Technology creates an air jet with a square corner, resulting in optimised drying ability. In addition, the 50Hz Axial Air Mover features built-in 4.5° positioning which increases the fan’s effective drying distance. The Phoenix 50Hz AAM is another example of superior performance and innovative design from Phoenix engineering.

Phoenix Focus Air Mover StandPhoenix Focus Air Mover Stand

  • For use with the Phoenix Focus only
  • Quick setup
  • 360-degree rotation
  • Solid construction
  • Folds flat for easy storage

Dry Air Force 9 Air MoverDry Air Force 9 Axial Air Mover

  • The New Force 9 from Dry Air Technology is cleverly designed for maximum air flow.
  • It has greatly reduced noise level and produces the largest drying area.
  • Power light indicators allow you to quickly identify high and low speed or air movers that are not operating because of a circuit overload.
  • An hour meter allows you to monitor the operating time on the job.
  • The Force 9 has a 30º wall angle guide moulded into both sides of the housing.
  • Reduced noise level for improved occupied environment conditions.
  • Can be stacked in 3 ways for both operation and storage.

Maximise the drying impact of any air mover by putting your Gale Force, Max Force, Clean Force or Force 9 on the stand that covers more ground, then stacks efficiently to save space. This terrific add-on weighs only 11 pounds.

Dri-Eaz Velo Low Profile Air Mover

Dir-Eaz Velo Air MoverPowerful air mover delivers restoration-grade air movement in a highly portable package.

High performance air movement in a small package? They said it couldn’t be done! But the new Velo delivers just that, and more: high velocity air movement, low amp draw and amazing portability. Dri-Eaz combined these features with easy cleaning, versatile application and legendary U.S.-made quality to make one of the most effective Dri-Eaz air movers has ever built.

Dri-Eaz Sahara TurboDryer

Dri-Eaz Sahara Turbo DryerWith its proven power and durability, the Dri-Eaz Sahara TurboDryer has long been the professional air mover of choice for top restorers. It has everything you need for effective structural drying, like low amp draw, high-velocity airflow and multiple operating positions.

  • Low amp draw!
  • Up to 2700 CFM
  • Two speeds and four positions for versatility

Dry Air Technology Air Mover StandDry Air Technology Air Mover Stand

  • For use with all Dry Air Axial Air Movers around Australia
  • Quick setup
  • 360-degree rotation
  • Solid construction
  • Folds flat for easy storage

Dri-Eaz Vortex Axial Fan

Dri-Eaz Vortex Axial FanThis Dri-Eaz air mover will ventilate confined spaces through up to 125 feet of Sto&Go ducting. The Vortex uses a 12″ axial fan blade to pull musty air out or propel fresh air in to inaccessible areas. It’s also an ideal choice for drying large open areas like gyms, concrete pads, hallways, etc.

  • Powerful 1.0 hp motor
  • Built-in handle
  • Stackable for storage!
  • Operate standalone or with Sto&Go ducting

Dry Air Technology VAF-12E

VAF-12E FanThe VAF-12E is widely used for confined space ventilation, positive and negative air set up, spot cooling, exhausting fumes and dust.

Compared to heavier metal fans the VAF-12E is lightweight and portable making it easier to carry. Its heavy duty housing is virtually indestructible.

Dry Air Technology Max Force

Dry Air Technology MaxForceThe MAX Force delivers maximum air flow for hard to reach areas, under floor spaces, attics and ducted drying.
Ideal for:

  • Moving large volumes of air through ducting for hard to reach areas.
  • Ventilating under floor spaces and attics.
  • Use as a high volume unit for open air drying.
  • Direct air to hard to reach areas for spot drying.
  • Use with attachments for negative and positive drying.

Ducting for Ventilators

Ducting bag for VentilatorsThe ducting bag for ventilators lets you get to those hard to reach areas. Any nook, cranny or corner will easily be accessed by hooking up this ducting bag to a Dry Air Technology VAF-12E ventilator.


Dynabreeze FanDynabreeze 900mm Fan

Built for endurance and extended performance, this fan features an extra strong heavy duty safety grill and powerful 220W motor with 3 speed functionality for the ultimate cooling range.

Dri-Eaz Turbo DuctDri-Eaz TurboDuct

Ventilate or dry confined spaces like closets, crawlspaces or attics with the TurboDuct. Attach the TurboDuct to the snout of a Sahara Pro-HP for 15 feet of 10″-diameter ducting.

Dri-Eaz TurboChannel

Dri-Eaz Turbo ChannelFinally— the solution for hard to dry areas!

Areas like sole plates, bay windows, and plinths are usually the last to dry. You don’t need more equipment to dry these stubborn areas—you need more air velocity. Now you can increase the air velocity of your Dri-Eaz TurboDryers with an exciting new accessory called the TurboChannel. This new product concentrates airflow to hard-to-dry areas by increasing air velocity 40-50% up to 3-7.5 meters from the TurboDryer.

Dri-Eaz Turbo Channel FloorDri-Eaz Floor TurboChannel

Areas like skirting boards, bay windows, sills, and behind plinths are usually the hardest and last to dry. You don’t need more equipment to dry these stubborn areas – you need more air flow.

Dri-Eaz 48 inch Turbo VentDri-Eaz TurboVent 48″

Dry walls with the power of a Sahara Air mover. Attach the TurboVent 48 directly to the snout to deliver a 48 inch wide column of air. It is ideal for drying wet wall and ceiling cavities.



Dri-Eaz TurboVent Inter Air Drying System

Dri-Eaz Turbo Vent Inter AirAttach the TurboVent to your Sahara Pro-HP TurboDryer and force air into difficult-to-dry areas like cabinets,

cupboards and walls.

We are here to help

  • This field is for validation purposes and should be left unchanged.